Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed. LCD Display Power Meter Socket,Power Meter Plug Outlet,Electricity Usage Monitor Socket,LCD Energy Power Meter Socket,Digital LCD Power Meter Socket NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com
I. Purchasing No.: Ancai Inquiry Purchasing [2009] No. 54 II. Purchasing Project: LED Display and Queuing Equipment 3. Time for Request for Quotation: June 12, 2009 - June 16, 2009, morning 8:30--11:30, 14:30--18:30
4. The place where the inquiry documents are collected and the bidding place: Anyang Fangzheng Bidding and Purchasing Service Co., Ltd. V. Deadline for bidding: June 16th, 2009 at 11:00 am
Sixth, bidding unit qualification requirements: independent legal person enterprises or other organizations with independent civil liability.
VII. The bidding opinions of this inquiry purchase will be recommended by the inquiry group for three working days in China (Anyang) government procurement network, Henan government procurement network, and Anyang bidding procurement online. If there is any objection, it may submit a written challenge to the procurement agency within the stipulated time (written question and submit it to the Government Procurement Management Office of Anyang City Finance Bureau). If there is any objection to the reply from the procurement agency, it may go to the Anyang Municipal Finance Bureau Government. Written complaints from the Procurement Management Office. (The specific procedures are implemented in accordance with the “Management Measures for Government Procurement Information Announcementâ€, “Administrative Measures for Government Procurement Suppliers†and “Administrative Measures for Bidding and Tendering of Government Procurement Goods and Services†issued by Yucai [2004] No. 23; Bidding Purchasing Network - Policies and Regulations.) Company Name: Anyang Fangzheng Bidding Purchasing Service Co., Ltd. Contact: Bai Yang Tel: 0372-2283981, 2283983 E-mail: Fax: Postal Code: Address: No. 36, Renmin Avenue, Anyang City Second floor 
Built-in 3.6V rechargeable Batteries ( . The purpose of the batteries is to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,
press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from
one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current power which ranges in 0.0W 〜 9999W. LCD on third line displays the current electricity costs which ranges in O.Ocost 〜 9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which
means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000KWH 〜 9999KWH without other figures. LCD on third line displays"DAY"- "1 'Will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untill the maximal cumulative time of 9999 days.
Mode 3: TimeA^bltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V 〜 9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ 〜 9999Hz without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.LCD on second line displays load current which ranges in 0.0000A 〜 9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 LOOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 dones. LCD on
second line displays the minimum power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: Time/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the''OVERLOAD[ with booming noise to warn the users,( 1918928,selectable choice)
Supplemental informations:
1: Except [OVERLOAD[ interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&"Down" are in no function under un-setting mode.
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device
has entered the setting mode. After that, press FUNCTION for swithing , then press "UP"and "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.
LED display and queue machine equipment inquiry announcement
Title: LED Display and Queuing Equipment Inquiry Announcement Tender No.: Ancai Inquiry Purchasing [2009] No. 54 Announcement Date: June 15, 2009 Deadline: June 16, 2009 Tendering Agency: Province: Henan Province-Anyang City Content: Anyang City Fangzheng Bidding Purchasing Service Co., Ltd. accepted the entrustment to purchase and purchase LED display and queuing equipment required by a certain unit in Anyang City. Welcome domestic units with supply capacity to participate. The notice of the matter is as follows: