The AC800F controller is a fieldbus-enabled controller introduced by ABB in 2000. It has a rich fieldbus interface and can realize controller redundancy, communication redundancy and power supply redundancy. The system has supporting configuration software CBF, human-machine monitoring software DigiVis and corresponding additional software packages. It is very suitable for end users and design units for their own engineering projects, because there is almost no secondary development work. AC800F controller main unit model PM802F8M PM803F16M Power Module Model SA801F 220VAC SA811F SD802F 24VDC SD812F Ethernet module model EI801F 10BASE-2 EI811F EI802F AUI EI812F EI803F 10BASE-T EI813F Other communication module models FI810F CAN FI820F Serial FI830F Profibus DP FI840F FF Package model CBF-S Engineer Station Software (Standard Edition) CBF-P Engineer Station Software (Professional Edition) (with DigiLock, UFB, FDT) DigiVis C Operator Station Software Chinese Version CombiVis combo operator station software Attachment model TK807F SA801F power cable TK802F SD802F power cable AM895F front panel SB808F RAM Backup Battery (for EI8**F modules) AC800M The AC800M controller is another family of fieldbus controllers introduced by ABB in 2002. According to the performance, AC800M has up to 9 controllers for selection. Unlike AC800F, AC800M is only equipped with configuration software CCB, without its own people. - Machine monitoring software can use third-party software as its own human-machine monitoring software, so it is more suitable for engineering companies. The same AC800M can also achieve controller redundancy, communication redundancy and power redundancy. AC800M controller main unit model PM851K01 8M PM856K01 PM860K01 PM861K01 16M PM861K02 16M redundancy PM864K01 32M PM864K02 32M redundancy PM865K01 32M High Intergrity PM865K02 32M Redundant High Intergrity Other communication module models CI853 Dual RS232-C CI854 Profibus DP CI855 MB300 CI856 S100 I/O CI857 INSUM CI858 DriveBus CI862 TRIO Package model CCB Engineer Station Software 4.1, Product Box OPC OPC Server for AC800M License Attachment model SB821 External Backup Battery Module SS823 power switch unit TK851V010 Redundant Controller Connection Cable TB852 Redundant Controller Connection Terminal AC500 The AC500 controller is a relatively cost-effective controller introduced by ABB in 2005. It is a simple but flexible and consistent system for expanding and adding different bus capabilities. AC500 is equipped with configuration software PS501. It does not have its own man-machine monitoring software. It can use third-party software as its own man-machine monitoring software. AC500 controller main unit model PM571 SDRAM: 4026K Flash: 1024K PM581 SDRAM: 8192K Flash: 2048K PM591 SDRAM: 32768K Flash: 8192K Other communication module models CM572-DP Profibus DP CM575-DN DriveNet CM577-ETH TCP/IP, UDP/IP, Modbus TCP CM578-CN CANopen Package model PS501 programming software, English Attachment model TA524 Communication Blind Board TA521 lithium battery MC502 SD Memory Card, 128 MB TK501 programming cable AC31 AC31 is ABB's most classic PLC product, divided into 40, 50 and 90 series. AC31-50 controller main unit model 07KR51 24VDC, Relay 07KR51 120/230VAC, Relay 07KT51 24VDC, Transistor Package model AC31GRAF programming software, English Attachment model 07 SK 50(52) programming cable 07 SK 51(53) Communication Cable NCB CS31 Communication Repeater NCBR CS31 Communication Repeater (redundant) AC31-90 controller main unit model 07 KT 95 24VDC, 12DI, 8DO, 4AI, 2AO 07 KT 97 24VDC, 24VDC, 24DI, 16DO, 8DI/O, 8AI, 4AO 07 KT 97 - PROFIBUS/DP 07 KT 97 - CAN open 07 KT 97 – Ethernet 07 KT 97 – ARCNET 07 KT 97 - Ethernet-CAN open 07 KT 97 - Ethernet-Ethernet 07 KT 97 - Ethernet-ARCNET 07 KT 97 - Ethernet- PROFIBUS/DP 07 KT 97 - ARCNET & PROFIBUS 07 KT 98 - Ethernet 07 KT 98 - CAN open 07 KT 98 - DeviceNet 07 KT 98 - Ethernet-ARCNET 07 KT 98 - Ethernet- PROFIBUS 07 KT 98 - Ethernet-CAN open 07 KT 98 - ARCNET-CAN open Package model 907 AC 1131 programming software, English Attachment model 07 SK 90 programming cable 07 SK 91 Communication Cable 07MC90 memory card 07LE90 lithium battery S500 I/O S500 I/O is ABB's new, cost-effective, common I/O product that can be used in a variety of applications. Communication unit model DC505-FBP, Profibus DP DC551-CS31, CS31 Analog module model AI523, AI 16ch U/I/PT100 12bit+sign, 2-wire AO523, AO 16ch U/I 12bit+sign, 2-wire AX522, AI 8ch/AO 8ch U/I/Pt100,12Bit+sign,2-wire Switch module model DI524, DI 32ch, 24 V DC, 1-wire DC532, DI 16ch/DO 16ch, 24VDC, 1-wire DO524, DO 8ch,24VDC Trans.2A DX521, DI 8ch/DO 4ch 24VDC, Relay, 2-wire DX531, DI 8ch/DO 4ch 230VAC, Relay, 2-wire Mounting base model TU505, FBP Terminal Unit, Screw Terminals TU506, FBP Terminal Mod. Spring Terminals TU515, I/O Terminal Unit, 24 V DC, Screw Terminals TU516, I/O Terminal Unit, 24 V DC, Spring Terminals TU531, I/O Terminal Unit, 230 V AC, Relay, Screw Terminals TU532, I/O Terminal Unit, 230 V AC, Relays, Spring Terminals Attachment model PDF11-FBP.0, FBP Communication Cable Female Connector PDM11-FBP.0, FBP Communication Cable Male Connector PDP22-FBP.XXX, FBP Communication Cable and Female Connector, 0.XXm PDR11-FBP.150, FBP Communication Termination Resistor, 150 ohms S800 I/O S800 I/O is the most widely used I/O product by ABB. In addition to ordinary I/I, redundant I/O and intrinsically safe I/O are also provided. Communication unit model CI801, Profibus DP CI810, AF100 CI830, Profibus DP CI840, Profibus DP redundancy Analog module model AI801, AI 8ch, 0/4-20 Ma AO801, AO 8ch, 0/4-20 mA AI810, AI 8ch, 0/4-20mA, 0/2-10V AI820, AI 4ch, +-0/4-20mA, 0-5V, 0-10V AI830, AI 8ch, RTD(Pt100, Cu10) AI835, AI 8ch, TC(B,C,E,J,K,N,R,S,T) AI843, AI 8ch, TC(B,C,E,J,K,N,R,S,T), Redundancy AI845, AI 8ch, 0/4-20mA, 0/2-10V, Redundant AI890, AI 8ch, 0/4-20 mA, safety barrier AI893, AI 8ch, TC(B,C,E,J,K,N,R,S,T), Safety Barrier AI895, AI 8ch, 0/4-20 mA, Safety Barriers, HART AI880A, AI 8ch, 0/4-20mA, redundant AO810, AO 8ch, 0/4-20 mA AO820, AO 4ch, 0/4-20 mA, Isolated AO845, AO 8ch, 0/4-20mA, redundant AO890, AO 8ch, 0/4-20 mA, safety barrier AO895, AO 8ch, 0/4-20 mA, safety barrier, HART Switch module model DI801, DI 16ch, 24VDC DI802, DO 8ch, 120VAC DI803, DI 8ch, 230VAC DO801, DO 16ch, 24VDC DO802, DI 8ch, 120VAC DI810, DI 16ch, 24VDC DI811, DI 16ch, 48VDAC DI814, DI 16ch, 24VDC, Active DI820, DI 16ch, 24VDC, Active DI821, DI 8ch, 220VDC DI830, DI 16ch, 24VDC, SOE DI831, DI 16ch,48VDC,SOE DI840, DI 16ch, 24VDC, redundant DI885, DI 8ch, 24/48VDC, SOE DI890, DI 8ch, 24VDC, safety barrier DI880, DI 16ch, 24VDC, redundant, SIL3 DO810, DO 16ch, 24VDC, 0.5A DO814, DO 16ch, 24VDC, 0.5A, Active DO815, DO 8ch, 24VDC, 0.5A, Active DO820, DO 8ch, 24-230VAC, Normally Open, 3A DO821, DO 8ch, 24-230VAC, Normally closed, 3A DO840, DO 16ch, 24VDC, redundant DO890, DO 4ch, 24VDC, Safety Barrier DO880, DO 16ch, 24VDC, 0.5A, Redundant, SIL3 Mounting base model TU846, CI840 base (for redundant I/O) TU847, CI840 Base (for non-redundant I/O) TU805K01, terminal board for DI801, DO801, two/three wire connection TU810V1, Compact Module Terminal Block Insulation Voltage 50V, 16 Signal Terminals TU811V1, Compact Module Terminal Block Insulation Voltage 250V, 16 Signal Terminals TU812V1, 25 hole D-type connector for compact module terminal block TU814V1, Compact Module Terminal Block 2*8 Signal Terminals TU830V1, Extended Module Terminal Block Insulation Voltage 50V, 2*16 Signal Terminals, 24VDC TU831V1, Extended Module Terminal Block Insulation Voltage 250V, 2*8 Signal Terminals, 230VAC TU835V1, Extended modular terminal block for AI810, with insurance TU836V1, Compact Module Terminal Block for DO820, DO821, with Insurance 2*4 TU837V1, Extended Module Terminal Block for DO820, DO821, with Insurance 1*8 TU838, extended modular terminal strip with fuse 2*4, 16 signal terminals TU842, Redundant Module Terminal Block for DI840,DO840,AO845,horizontal mounting TU843, Redundant Module Terminal Block for DI840, DO840, AO845, Vertical Mount TU844, Redundant Module Terminal Block for AI845, DP840, Horizontal Mount TU845, Redundant Module Terminal Block for AI845, DP840, Vertical Mount TU890, Intrinsically safe module terminal block TU891, non-intrinsically safe module terminal board Power Module Model SD821, Power Supply 24VDC, 2.5A SD822, Power Supply 24VDC, 5A SD823, Power Supply 24VDC, 10A SS822, Voting device SS823, Voting device Attachment model TY801K01, AI845 with resistors, mounted on TU844/TU845 (8 sets) TY804K01, DP840 with resistors, mounted on TU844/TU845 (set of 8), 1000 ohm TB807, Modular Bus Termination Resistor TK811V0XX, Double Plastic Optical Fiber, X.Xm TK801V0XX, Modular Bus Connection Cable, X.Xm TB805, Modular Bus Outlet TB845, Dual Module Bus Outlet TB806, Modular Bus Inlet TB846, Dual Module Bus Inlet TB820V2, Modular Bus Fiber Receiver TB840, Modular Bus Fiber Receiver, Redundant TB810, Modular Bus Fiber Interface TB811, Modular Bus Fiber Interface TB842, Modular Bus Fiber Interface TB840, Modular Bus Fiber Interface TB841, Modular Bus Fiber Interface Freelance2000 RACK I/O Freelance2000 RACK I/O is a fully metal-encapsulated I/O product with strong immunity to interference. Communication unit model DLM01, CAN DLM02, CAN, redundant Analog module model DAI01, AI 16ch, 0/4-20mA, R=50 Euro DAI02, AI 16ch, 0-10V DAI03, AI 16ch, 0/4-20mA, R=250ohm, HART DAI04, AI 8ch, mv, RTD, TC DA, I05, AI 16ch, 0/4-20mA, R=250 ohms, with power distribution DAO01, AO 16ch, 0/4-20mA, R=400 EUR Switch module model DDI01, DI 326ch, 24VDC DDI02, DI 16ch, 24-60VDC DDI03, DI 16ch, 115-230VAC DDI04, DI 28ch, 24VDC DDI05, DI 32ch, 115-230VAC DDO01, DO 32ch, 24VAC, 0.5A DDO02, DO 16ch, 24-230V/DCAC, 5A DDO03, DO 16ch, 24VDC, 5A DDO04, DO 16ch, 115-230V/DCAC, 5A Other module models DCO01, four serial communication modules RS232C/RS422/RS485 Modbus protocol DFI01, PI MAX 40KHz 4 channels with 2DI and 2DO Install the rack model DRA02, 10-slot rack (redundant) DRA03, 3-slot rack DRA04, 5-slot rack Power Module Model DPW01, Power Supply 24VDC, 5A DPW02, Power Supply 24VDC, 5A DPW03, Power Supply 24VDC, 5A Attachment model DSU491, 10-pin black I/O connector 4 packs for 1 I/O module DSU10, 24VDC power cable DSU11, DigiNet P CAN Network Cable DSU01, CAN Terminal Head 2 1 Packet S50 I/O S50 I/O is ABB's classic PLC I/O product. Communication unit model ICMK14F1, 24VDC, Relay, CS 31 Mode ICMK14F1, 120/230VAC, Relay, CS 31 Mode ICMK14N1, 24VDC, Transistor, CS 31 Mode ICMK14F1-M, 24VDC, Relay, Modbus Mode ICMK14F1-M, 120/230VAC, Relay, Modbus Mode ICMK14N1-M, 24VDC, Transistor, Modbus Mode 07KP53, AC31 Communication Expansion Unit (2*Modbus) Analog module model XM 06 B5, Expansion I/O 4 AI / 2 AO XE 08 B5, Expansion I/O 8 AI Switch module model XC32L1, Expansion I/O 32 Configurable DI/DO XC32L2, Expansion I/O 24 Configurable DI/DO, 8 Configurable AI/DI (0-10Vdc) XI 16 E1, Expansion I/O 16 DI 24VDC XO 08 R1, Expansion I/O 8 Relay DO (Relay, 2A) XC 08 L1, expansion I/O 8 configurable DI/DO (transistor, 0.5A) XK 08 F1, Expansion I/O 4 DI/ 4 Relay DO (Relay, 2A) XO 16 N1, Extended I/O 16 DO (transistor, 0.5A) XO 08 Y1, Expansion I/O 8 DO 24VDC, 2A XO 08 R2, Expansion I/O 8 Relay DO S90 I/O S90 I/O is ABB's distributed I/O product, with a high price/performance ratio. Analog module model 07 AI 91, Distributed I/O 8AI 07 AC 91, distributed I/O 8AC, configurable Switch module model 07 DI 92, Distributed I/O, 32DI 07 DI 92, distributed I/O, 16 DI, 8DO, 8DI/DO configurable (0.5A) 07 DC 92, distributed I/O, 32 configurable DI/DO (0.5A) CP400 The CP400 series control panel is ABB's latest human-machine interface, which is available from 3†to 10.4†for various models and specifications. It is used for human-machine interface in various control systems. Control panel and touch screen models CP410 M 3", S/W STN-LCD, 160*80, RS232/485/422 CP420 B 4.7", S/W-STN-LCD, 240*128, RS232/485 CP430B 5.7", S/W-STN-LCD, 320*240, RS232/485/422 CP430B ETH 5.7", S/W-STN-LCD, 320*240, RS232/485/422,Ethernet CP430C 5.7", Farb-STN-LCD, 320*240, RS232/485/422 CP430C-ETH 5.7", Farb-STN-LCD, 320*240, RS232/485/422, Ethnernet CP440 C-ETH 7.5", Farb-STN-LCD, 640*480, RS232/485/422, Ethnernet, USB CP450T 10.4", Farb-TFT-LCD, 640*480, RS232/485/422, USB CP450 T-ETH 10.4", Farb-TFT-LCD, 640*480, RS232/485/422, Ethnernet, USB PP800 PP800 series control panel including control panel and touch screen, from 6.5" to 15" various models have specifications for human-machine interface in various DCS control systems. Control panel and touch screen models PP836 PP836, 6.5" TFT640*480 pixels, picture and text, color PP846 PP846,10.4"TFT800*600 pixels, picture and text, color PP835 PP835, 6.5" LCD640*480 pixels, screen and text, touch screen, color PP845 PP845,10.4"TFT800*600 pixels,picture and text,touch screen,color PP865 PP865, 15" TFT1024*768 pixels, screen and text, touch screen, color Attachment model TK854V030 programming cable (Panel--PC), 3m TK212A Cable (Panel--AC800M), 3m CB801 Profibus DP Communication Interface CB810 USB--Ethernet Adapter Supporting software model Operate IT Panel Configuration Software Panel Builder 800 Version 5.0 Double Sided Pcb,Double-Layer Circuit Boards,Double-Layer Pcb Circuit Board,Double Sided Circuit Board Shenzheng Weifu Circuit Technology Co.Ld , https://www.viafoem.com
ABB DCS PLC preliminary understanding and configuration
St1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name: Normal form; mso-tstyle-rowband-size:0; mso-tstyle-colband-size: 0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt Mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso -fareast-language:#0400; mso-bidi-language:#0400;}